AC 220V 110V 1 CH 1CH RF Wireless Remote Control Switch System, 12CH Transmitter + 12 X Receiver, Toggle/Momentary, 315/433.92

AC220V 1 CH 1CH RF Wireless Remote Control Switch System 12CH Transmitter 12 X Receivers Toggle
  • Seller Abytele Store
  • List Price US $52.88piece
  • Your Price US $47.59piece
  • Shipping Free Shipping
  • You Save US $5.29piece10% off
  • Ratings 0.0 (0)

Item Specifics

Item TypeSwitches
Brand NameAbytele
Switch TypeRemote Control

Product Description

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
Channel: 12 CH
Remote Control Distance:0-200 M ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Encode: Fixed code, soldering PT2262
Frequency:315 or 433.92
Size: 125mm x 49mm x 20mm
Power Supply: 1 X 12V/23A (NOT included)
2.Control Mode
1)Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Toggle , Change it by yourself.)
Decode: Fixed code, soldering
Power Supply (Operating Voltage): AC 220V 110V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity:-105 dBm
Operating Temperature:-10‘C ~ 60’C
Size:55 mm x 24 mm x 17 mm
3.Package Included
12 x Receiver (with cover)
1 x Transmitter (no battery inside)
4.Learn code and Remove Code
Learn: input the 220V for the receiver,press the learning button until the LED indicator ON.Then press the transmitter ,the indicator flash fast,it means learning successfully.
Remove:keep pressing the learning button on the receiver until the indicator ON and flash fast,it means the codes is cleared successfully.

Similar Products