Cdycam Mini 2 0mp Ip Camera Full Hd 1080p Built In Poe Video Surveillance

Cdycam Mini 2 0mp Ip Camera Full Hd 1080p Built In Poe Ip Camera Video Surveillance
  • Seller -
  • List Price -piece
  • Your Price -piece
  • Shipping Free Shipping
  • You Save -0.00piece0 off
  • Ratings 4.2 (24)

Item Specifics

Brand NameCdycam
TypeIP Camera
StyleDome Camera
High Definition1080P(Full-HD)
ConnectivityIP/Network Wired
Lens (mm)3.6mm
Supported Operating SystemsWindows 7,Mac os,Windows XP
SensorCMOS
TechnologyInfrared
Special FeaturesVandal-proof
Sensor BrandSONY
Supported Mobile SystemsAndroid,iOS
Alarm ActionFTP Photo,Local Alarm,Email Photo
Network InterfaceRJ-45 10/100Mb Ethernet Slot
Video Compression FormatH.264
is_customizedYes
ColorWhite
InstallationCeiling
StorageNone
Audio OutputOther
Power SupplyOther

Product Description

main feature:

1. 2.0MP 1920*1080 High-resolution CMOS Sensor 2. Built in POE (Power Over Ethernet 10/100mbps IEEE802.3af for IP camera,12V 15.4W Support 10/100M) 3. Support RTSP: Main stream:rtsp://IP address:sport/0 Sub-stream: rtsp://IP address:sport/1 4. Capture command: http://IP address/snap.jpg

5. Support motion detection,send alarm to Email / FTP.

6. The camera support Firefox, Safari, Chrome(lower then version 45), IE8-IE11 in Windows system and Mac OCX after updated to new GUI, please check below picture.Besides, Do NOT support Chrome(higher than version 45) and Edge browser of Windows 10.

7.The difference between a Ordinary camera and a POE camera:

We are factory!

Packing:

Package contents:
1 * camera
1 * manual
1 * screws

1 * CD

How to connect the camera:

[1] IP searcher

After connecting our IP Camera to your computer or Router or interchanger, and make sure it has power on.

1. Get software “IP Search.exe” from CD disk and install it

2.Click “search” button, you can see IP camera shown with default ip address(192.168.1.168)

3. then change ip address according to your network segment

4. Finally click button “modify IP”, after some seconds click again “search” button and you will have IP camera with new IP address.

Please check below pictures.

[2] Computer Client Software CMS

install CMS

Find “HeroSpeedCMS.exe” from CD and install it

choose your language,

if first time login, you need to register

Search Add Device

1. open CMS software, click “Search Device” to search for device in LAN, or add device manually.

2. add device manually

[3] P2P Mobile phone function

1. download "freeip" app from app store or scan QR code from IE interface

2, 3. user register

4. add device

5-1. scan QR code from IE interface
5-2. input serial number manually

[4] IE login(or via Firefox, Safari, Chrome)

1. open your browser and Enter URL : 192.168.1.168(or IP address you change finally)

2. if first time login, you need to download an OCX activeX

3. download and install this OCX, refresh website then you will see below login interface.

4. choose your language then enter user name and password, both are “admin”(default)

Motion detection setting

when you want to set motion detection, you need to tick where shown in red in below photos.

choose sensitivity of motion detection, can choose from 0 to 10

if you do not want some areas shown, you can choose up to 3 areas on "privacy"

then you can set up SMTP server or FTP server when motion detection recording

Besic Setup

DDNS

FTP

SMTP

you can adjust image of camera, IR-cut Mode, white balance....

If you want to watch video from your mobile phone(Android or Iphone), you need to set camera in below picture

Triple stream:

Stream one

Stream two

Stream three