Galo 24VDC Swing Electric Gate motor arm Dual Auto Opener for The is easy to be opened

24VDC Swing Electric Gate Motor Arm For Dual Auto Electric Swing Gate Opener
  • Seller
  • List Price US $155.00piece
  • Your Price US $155.00piece
  • Shipping Free Shipping
  • You Save US $0.00piece0% off
  • Ratings 0.0 (0)

Item Specifics

Brand NameGALO
Security ModeFail Secure
DirectionNone

Product Description

Dual Swing Gate Operator is designed for residential/commercial applications.Stay warm and dry in your vehicle.This Dual Swing Opener will handle dual swinging gates up to 5meter(2.5meter per leaf) in length and weighing up to 300KGS.(150KGS per leaf) Swing Gate Opener PKM-101 has a powerful 24VDC motors,which provide exceptional starting torque and features soft start/stop operation.This promotes longer gate and operator life,as well as dependable performance.All the gate openers supplied are pre tested and of good quality long lasting and have a 12 Months back to base warranty on the complete system.
This dual arms swing gate opening system is a robust,tuff,long lasting,The motor can handle light gates.The PKM-101 swing gate operators is a sleek design telescopic linear screw type actuator that is made of stainless steel with a cast alloy motor housing.The two motors make are constructed of metal (no plastic, fibre or nylon).
The PKM-101 swing gate opener is fitted with an emergency manual override on each actuator to allow the user to open the gates manually in case of an emergency such as a power failure situation.
Swing Gate Operators Basic Kit Includes:
2 x DC gate motor that are pre-wired with motor cables
2 x Override spanners
2 x Remote controls
1 x Control panel
2 x Post mounting bracket
2 x Gate mounting bracket
1 x Rubber Gate Stop
1 x Instruction manual
Features of Electronic Swing Gate Openers Kit:
1.Easy to install and operate,and easy to connect wired.
2.Open and close the gate by remote control and keypad.
3.Time promotation function.when open gate,speed is slow,then a little quick,and when close the door,speed is slow again.
4.In case of power failure,release the clutch easily,and can operate the gate manually.
5.Working life about 15 years.
7.Stop working when gate meets with obstacle.
8.Rod\'s max travel is 300mm.
9.Motor\'s Poweer : 24VDC 40W
10.Running Speed :1.6cm/s
Advantages of Swing Gate Operators Controller :
1.Controller can connect flashing light,and photocell,and back up battery,solar system,and keypad and so on.
2.Controlling single or dluble-leaf motor is optional.
3.Can adjust open and close door time.
4.24VDC back-up battery can be input.(this is use large controller,our standard controller is small size.)
5.High speed operate can be adjustment.
6.Set extra remote control is easily,up to 30pcs remote control.
SWING GATE OPERATOR
1. 2 SIDE terminal is used for connecting any external device that operates double
gate
2. COM terminal is COMMON used for connecting the “ground” of external devices
3. 1 SIDE terminal is used for connecting any external device that operates single gate
4. Swipe Card terminal is used for connecting any external devices that will operate to
open the gate
5. COM terminal is COMMON used for connecting the “ground” of external devices
6. Infrared terminal is used for connecting photo electric sensor
7. 12V DC output is used for connecting photo electric sensor (Continuous output
current <=200mA)
8. 24V battery output is used for connecting the back up battery +
9. 24V battery output is used for connecting the back up battery -
10. 24V DC output is used for connecting external device. (such as photo electric
sensor, max current output 1A)
11. GND is used for connecting the “ground” of external devices
12. 24V DC lamp output is used for connecting flash light +.
13. 24V DC lamp output is used for connecting flash light -.
14. 24V DC lock output—the NF terminal which used for connecting the electric lock
15. COM is COMMON used for connecting the “ground” of lock
16. 24V DC lock output—the NA terminal which used for connecting the magnetic
lock
17. 24V DC alarm output
18. 24V DC alarm output
19. and 20. Motor1 terminal is used for connecting the motor 1 installed on the gate
that opens later and close first. This terminal connect 1st red wire (counted from your
left hand side to right hand side)
21. and 22. Motor2 Delay terminal is used for connecting the motor 2 installed on the
gate that opens first and close later. This terminal connect 1st blue wire (counted
from your left hand side to right hand side). NOTE! If for single gate, the gate motor
just can connect the Motor2 Delay terminal.
23. AC24V input is used for connecting the transformer
24. AC24V input is used for connecting the transformer
25. digital display is used for showing you the setting data
26. INC+ is used for figure increase when setting the data
27. FUN is used for store the data
28. DEC- is used for figure decrease when setting the data
29. Learning button is used for program/remove remote

Similar Products